CB-FE series gear pump consists of three sections, front and rear pump covers, and central section fitted together with two positioning pins and four screws, “sweeping” chamber of gear tip as radial seal and pressure side plate as axial seal thus providing optimum axial clearance so as to ensure higher volumetric efficiency of gear pump. Slide bearing reeled up with SF composite material can bear higher load and has longer service life.For this series pump adopts both high strength cast iron body and light strength aluminum alloy body, the pump with the former body can operate at rated pressure of 16 MPa, and the pump with the latter body at 29 MPa.

CB-Fe Series Single Gear pump:CB-FE10E  CB-FE16E  CB-FE20E  CB-FE25E  CB-FE31.5E CB-FE40E  CB-FE50E  CB-FE63E  CB-FE10F  CB-FE16F  CB-FE20F  CB-FE25F  CB-FE31.5F  CB-FE40F
CB-FE50F

2CB-FE Series Double Gear pump:refer to the catalogues.